Nico Eliges
Im passionate about boats
Profile
Summary
-2d, 3d design and development, parts, plugs, moulds. Soft:Auto-cad, Rhinoceros, V-Ray, Max-surf.
-Hull and deck marks, center line, flotation water line, structure position, local reinforcements, recesses, etc.
-Reverse engineering.
-Composite lamination. Polyester, vinylester, epoxy sytems (WET, PRE-PREG, INFUSION): bare hull, deck, bulkheads, chainplates, rudders, parts, housings, etc.
-Structure: fitting and bonding of bulkheads, logitudinal girders, keel floors, etc.
-Composite machining inside,-outside boat.
-Moulds carpentry: overall, since strong-back to demoulding system.
-Movements and logistic.
-Hull and deck marks, center line, flotation water line, structure position, local reinforcements, recesses, etc.
-Reverse engineering.
-Composite lamination. Polyester, vinylester, epoxy sytems (WET, PRE-PREG, INFUSION): bare hull, deck, bulkheads, chainplates, rudders, parts, housings, etc.
-Structure: fitting and bonding of bulkheads, logitudinal girders, keel floors, etc.
-Composite machining inside,-outside boat.
-Moulds carpentry: overall, since strong-back to demoulding system.
-Movements and logistic.
Experience
- Nov 2012 - PresentConstruction management / Marine Sur S.A.At first I've got involved in process engineering (planning and floor layout), technical definitions and suppliers contact in order to do my actual job: construction management. This job include the following tasks: boatyard set-up, transfering technical know-how, workers management and quality control.
- Aug 2010 - PresentBoatbuilder / Astillero Buquebus, PROYECTO GOLETA 172´ "DOÑA FRANCISCA"-Winches bases fitting, height and angle (longitudinal and transversal). -Housings machining and bonding (captive winches). -Participate in shaftline fitting, stern tube. -Boat nivelation. -Captive winches bases structure fitting and bonding. -Housings and small parts lamination. -Portholes bonding. -Fitting and bonding of water tight passages. -Bowsprit chainplate strap lamination.
- Aug 2010 - PresentBoatbuilder / KING HARKEN. PROJECT 172' CRUISING SCHOONER "DOÑA FRANCISCA"
- Apr 2010 - PresentTechnical draftsman / KAYAK EngineeringPipping isometrics, electrical diagrams, instruments diagrams, constructive plans.
- Nov 2009 - PresentTechnical draftsman / GL Consulting s.r.l.Drawing planes of plants and warehouses that work with LPG. - planes of minimal distances and safety elements. - planes of electrical installation. - reports in situ.
- Mar 2008 - PresentTrainee / Academic Shipyard (Quilmes National University)
- Jan 2006 - PresentForniture seller, 2d plots, 3d renders, carpentry. / Mario Eliges Desing
Education
-
2007 - 2012Universidad Nacional de QuilmesStill studying in Naval Architecture
Additional Information
Interests:
Boatbuilding.
